Second Storey Additions in NSW: What to Check First
Back to blog

5 November 2026

Second Storey Additions in NSW: What to Check First

Planning a second storey addition in NSW? Check your home's structure, title restrictions, approvals, BASIX and living arrangements first.

A second storey addition adds rooms above your existing home. In NSW it can be complying development under the Housing Code if it meets the code, including the 8.5 m height limit; otherwise it needs a development application and a construction certificate. Before design, have an engineer check the existing structure and check your title for covenants.

Key facts

  • Alterations and additions may be complying development under the NSW Housing Code, which includes an 8.5 m maximum height measured from existing ground level.
  • A complying development certificate does not override a private covenant, including one that limits building heights.
  • BASIX applies to renovation work valued at $50,000 or more.
  • For a home built before the late 1980s, SafeWork NSW says asbestos may be present.
  • Work over $5,000 needs a licensed builder. For work over $20,000, the builder must show you home building compensation cover before work starts or you pay any money.

Is your home suited to a second storey?

Your existing house needs a structural check before you plan rooms above it. An engineer checks the footings, walls and roof framing because the Housing Code requires all works to be structurally adequate and to comply with the Building Code of Australia.

The check should happen before the design is settled. You also need to allow for the new stair location, which takes space on the ground floor. Existing access, services and the way the new work connects to the old home affect the planning.

Start with these checks:

  1. Check the title for covenants and other restrictions.
  2. Have an engineer check the existing footings, walls and roof framing.
  3. Review where stairs, services and construction access could fit.
  4. Test the proposed upper level against height, setback and privacy controls.

Will you need a CDC or DA?

A second storey may use a complying development certificate if the proposal meets the Housing Code. If it does not meet the code, you will need a development application; under a development consent, work cannot start before a construction certificate and an appointed principal certifier.

Approval pathWhat to check
Complying development certificateThe addition must meet the Housing Code, including its height, setbacks, privacy, landscaping and site-control requirements. No construction certificate is needed with a CDC.
Development applicationUse this path when the design does not meet the complying development standards. A construction certificate and principal certifier are required before work starts under the development consent.

Height, upper-level setbacks and privacy can make approval harder. The Housing Code includes an 8.5 m maximum height measured from existing ground level, landscaping rules where the footprint grows, and bush fire and flood standards in clauses 3.4 and 3.5.

Private covenants still apply under a CDC. A covenant that limits building heights is not overridden by complying development. Review the title and a 10.7 planning certificate early, then check the relevant planning controls for the property.

The NSW Housing Code is the primary source for the complying development requirements.

When do BASIX and asbestos checks matter?

BASIX applies to renovation work valued at $50,000 or more. An older home also needs an asbestos check before work disturbs roof or other building materials.

Use the NSW Planning Portal BASIX information to check the renovation threshold. For homes built before the late 1980s, SafeWork NSW warns that asbestos may be present and sets licence rules for its removal. See the SafeWork NSW asbestos guidance before planning demolition or removal work.

Will you need to move out during the work?

You will usually need to move out while a second storey is added. As our double storey vs single storey guide notes, adding a storey to an existing home involves structural work and moving out, and access, services, stairs and construction activity all affect day-to-day living.

Plan your living arrangements before the design is final. Consider where you will stay, how belongings will be protected and how the site will be accessed. The timing and practical arrangements depend on the home's layout and the proposed staging, so discuss them during the existing-home review.

Should you build up, extend at ground level or rebuild?

Building up keeps the addition above the existing footprint, while a ground-floor extension changes the footprint and a rebuild replaces the existing home. The right path depends on the structure, site controls, available space and how much of the current home you want to retain.

OptionMain question to ask
Second storey additionCan the existing structure support another level, and can the design meet height, setback and privacy controls?
Ground-floor extensionDoes the block have enough usable area for a larger footprint while meeting landscaping and other controls?
Knockdown rebuildWould replacing the existing home provide a more suitable layout than adapting its structure and services?

Compare the options before committing to drawings. Our guide to knockdown rebuild versus renovation can help you frame that decision.

What protections apply when you appoint a builder?

Check the builder's licence, insurance and contract protections before work begins. NSW requires a licence for residential building work over $5,000, and home building compensation cover for work over $20,000 before work starts or you pay any money.

  • The maximum deposit before work starts is 10%.
  • Statutory warranties run for six years for major defects and two years for other defects.
  • The owner is responsible for appointing the certifier.

Read the NSW Consumer Building Guide before signing. It sets out these licensing, insurance, deposit, certifier and warranty requirements.

How we approach a second storey addition

We begin with the existing home rather than drawing a standard upper floor. Our renovations service covers an existing-home review, extension and renovation planning, material and finish guidance, and construction coordination, and we review the existing structure, access, services, staging and how the new work connects to the old home.

Our eight steps are initial consultation, site review, concept and design, estimate and proposal, approvals pathway, selections, construction updates and handover. See our renovations and extensions service for the scope of existing-home work.

Frequently asked questions

Do I need council approval for a second storey?

You need an approval pathway before building. A second storey may qualify as complying development under the NSW Housing Code if it meets the code, including the 8.5 m height limit and relevant setback, privacy, landscaping, bush fire and flood requirements. If it does not, you need a development application, construction certificate and principal certifier before work starts under the consent.

Can my existing house take a second storey?

It may be possible, but an engineer must check the existing footings, walls and roof framing first. The Housing Code requires all works to be structurally adequate and comply with the Building Code of Australia. Stairs, services, access and the connection between the old and new work also affect the design, so review the existing home before settling the upper-floor layout.

Can a covenant stop a second storey?

Yes, a private covenant can restrict a second storey, including by limiting building height. Complying development does not override private covenants. Check the title before relying on a CDC, then review the proposed height and other controls against the property. A 10.7 planning certificate is also part of the early site and planning review.

Do I have to move out?

You will usually need to move out while the work is under way. Adding a second storey involves structural work, changes to access and services, and construction activity around the existing home. Your living arrangements depend on the home's layout and staging. Plan temporary accommodation, belongings and site access before the design and construction approach are finalised.

Second storey or knockdown rebuild?

A second storey retains the existing home and adds rooms above it, while a knockdown rebuild replaces the home. Compare the structural condition, title restrictions, planning controls, available ground-level space, services and the layout you need. If adapting the existing home creates too many constraints, review the knockdown rebuild versus renovation pathway before proceeding with detailed design.

Next step: check your title for covenants and order your 10.7 planning certificate, then talk to us about whether your home suits a second storey.