Site Drainage Design: A Practical Checklist Before You Build
Back to blog

23 October 2026

Site Drainage Design: A Practical Checklist Before You Build

Plan site drainage design before building or renovating with a practical checklist covering levels, stormwater discharge, approvals, sloping sites and costs.

Site drainage design should be investigated during the initial site review and early home design, not left until construction is about to begin. The position of the house, finished floor levels, roof and paving areas, retaining walls and available stormwater discharge route can all affect the design, approvals and budget.

For homeowners planning a custom build, knockdown and rebuild, duplex, granny flat, renovation or extension in Western or Northwest Sydney, the right drainage solution depends on the individual block and the responsible local council. Use the checklist below to identify the questions that need answers before you approve a design or compare builder proposals.

Quick summary

Sloping residential block with retaining wall drainage and stormwater pipes
  • Obtain reliable site levels and understand how water currently moves across the block.
  • Map roof, driveway, terrace and other paved areas because they create stormwater catchments.
  • Confirm a feasible and lawful discharge route before the design is finalised.
  • Assess slopes, soil, retaining walls, existing services, easements and water arriving from adjoining land.
  • Ask for drainage, earthworks and service connections to be clearly separated from the headline house construction rate.

What site drainage design involves

Site drainage design is the process of deciding how rainwater and runoff will be collected, controlled and discharged from a property. It usually considers water from roofs, driveways, paths, terraces and other impermeable surfaces, as well as water that may flow onto the site from higher ground.

Stormwater drainage design is the technical planning of that system. It may include roof gutters, pits, pipes, tanks, pumps, overflow paths and the connection to a street network, easement or other approved outlet. Broader water management also includes how finished ground levels, landscaping and retaining walls keep water away from the home and neighbouring properties.

The objective is not simply to move water away as quickly as possible. The system must suit the levels and conditions of the site, protect the building, manage overflow and comply with the requirements that apply to the proposed development. NSW guidance assesses a stormwater tank by its capacity, connected catchment area and intended water uses, so a tank is not an interchangeable add-on to every design. Stormwater requirements should be checked for the specific project.

Exact requirements vary between councils and approval pathways. Council engineering guidelines are not automatically statewide rules, so the responsible council and the specific property must be confirmed before technical assumptions are made.

Site drainage design checklist: What to investigate first

Homeowners reviewing a residential drainage plan and construction proposal

Use this checklist during the site review and before the home design is locked. Each item can change the house layout, construction method, discharge strategy or cost.

1. Survey levels and contours

Start with a current survey that shows boundaries, contours, existing structures and relevant levels. Drainage relies on the relationship between the existing ground, finished floor, paving and discharge point. Without reliable levels, it is difficult to know whether water can flow by gravity or whether excavation, filling, retaining or pumping may be needed.

2. Roof and paving catchments

Identify the areas that will collect runoff. Include the main roof, garage, alfresco, driveway, paths, balconies and large paved courtyards. A larger roof or more extensive hard surface can increase the amount of water that must be collected, detained, reused or discharged.

3. Soil and ground conditions

Soil, fill, rock and groundwater can affect excavation, footing design, pipe installation and the stability of retaining walls. These conditions should be considered alongside the drainage concept rather than treated as separate issues, particularly on a rebuild or a block that has been altered previously.

4. Slope and overland flow

Determine whether the site falls toward the street, away from it, sideways or toward the house. Also look for water arriving from adjoining land. A property may need a route that protects the building from overland flow while allowing excess water to continue to a suitable outlet.

5. Existing drainage and services

Record existing pits, pipes, downpipes, connections, sewer lines, water services, electrical infrastructure and other underground assets. Existing services should be identified before excavation and shown on the relevant drawings. A proposed pipe route that conflicts with a service can create redesign, access and cost problems.

6. Easements and title restrictions

Check the title, deposited plan and available property records for drainage easements, restrictions and covenants. An easement may provide an important discharge opportunity, but its location, capacity, legal purpose and connection requirements still need to be verified. It should never be assumed that a neighbour’s land can be used for drainage.

7. Retaining walls

Where retaining is required, allow for drainage behind the wall, an appropriate outlet and a safe overflow route. Retaining walls can change the way water moves through the block, and poor coordination between the wall, house slab and surface levels can direct water toward the building.

For a broader review of how slope, retaining walls and stormwater routes interact, see this explanation of stormwater discharge on sloping sites. A separate site review checklist can also help organise the information to gather before design begins.

8. Council and approval requirements

Identify the likely approval pathway and ask what drainage documentation it requires. The requirements may differ for a new home, extension, duplex, granny flat or other multi-dwelling project. Do not rely on a drainage detail prepared for another suburb or council.

How site conditions change the drainage solution

A flat, prepared estate lot may allow a relatively direct gravity connection, while a sloping or constrained block can require a different arrangement. The fall of the land affects where the house can sit, how much cut and fill is needed and whether retaining walls will interrupt natural water movement.

On a steep site, stepping the home with the land may reduce excavation and retaining compared with forcing a flat floor plan onto the block. However, the design still needs to protect lower-level rooms, garages and retaining structures from surface water and runoff from above.

The direction of the slope also matters. If the site falls away from the street, gravity may not carry all stormwater to the kerb. Depending on the property, the options could include an easement or a pump and tank arrangement. These are possibilities to investigate, not guaranteed solutions.

House placement, finished levels and drainage should therefore be resolved together. Changing the building footprint after the drainage concept has been prepared can affect pipe routes, retaining walls, driveway levels and approval documentation.

Stormwater discharge options: What may be possible

The most suitable discharge approach depends on the site levels, local infrastructure, council requirements, easements, catchment and proposed development. The following comparison is a starting point for discussion, not a substitute for a site-specific design.

Possible approachWhen it may be consideredImportant question
Street or kerb connectionThe site can convey water by gravity to an approved street drainage point.Is the connection available, correctly located and accepted by the responsible authority?
Drainage easementA registered easement provides a lawful route to another drainage system or outlet.What are the easement conditions, capacity and connection details?
Tank or on-site detentionWater needs to be stored, reused or released at a controlled rate.What capacity, connected catchment and overflow arrangement are required?
Pump-assisted systemLevels prevent a complete gravity connection to the available outlet.Where will the pump, storage, power supply, overflow and maintenance access be located?

Some council controls expect roof and impermeable-area runoff to reach the public drainage network through a free-flowing gravity system where that is feasible. Where gravity discharge is not possible, another route may be considered, but the local rule and property-specific approval must be checked.

What a drainage plan may need to show

A detailed drainage plan may show the method of disposal, existing ground levels, finished surface and floor levels, paved areas, flow rates, pipe sizes, invert levels, tanks, pits, overflow paths and the point of connection. One NSW planning document, for example, requires detailed drainage information before release of a Construction Certificate, including existing and finished levels and estimated flow rates. That document is an example of possible requirements, not a universal rule for every council.

Technical calculations and documentation should be prepared or reviewed by the appropriately qualified professional for the project and approval pathway. A builder can coordinate design information and construction planning, but homeowners should confirm who is responsible for hydraulic design, engineering, certification, council liaison and final installation.

Ask for the drainage assumptions to be recorded on the drawings and proposal. This makes it easier to identify whether the design relies on a particular outlet, easement, tank capacity, pump or finished level.

Why drainage belongs in the budget from the start

Headline house rates often do not include every site cost. Drainage, earthworks, retaining walls, demolition, difficult access and service connections may be priced separately, especially on a knockdown rebuild, sloping block or constrained site.

That is why a square-metre comparison can be misleading. A realistic budget should allow for drainage and service connections separately from the house construction cost, then confirm which items are included in the estimate, proposal and building contract.

When comparing proposals, look for the assumed site levels, discharge point, pipework, pits, tanks, pumps, retaining-wall drainage, connection fees, testing, reinstatement and landscaping. Check whether each item is fixed, allowed as a provisional amount or excluded. A lower headline price may simply leave more site work unresolved.

Questions to ask before approving the design or quote

  • What survey, soil and site information has been used for the drainage concept?
  • Where will roof, driveway and paved-area runoff be collected?
  • What is the proposed discharge point, and has its availability been verified?
  • Does the design rely on a drainage easement, pump, tank or on-site detention?
  • How will water from higher adjoining land and overland flow be managed?
  • What drainage is required behind retaining walls?
  • Who prepares the hydraulic calculations and detailed drainage documentation?
  • Who coordinates council, certifier, engineering and approval requirements?
  • Are drainage pipes, pits, tanks, pumps, connections and reinstatement included in the price?
  • Which drainage and site-work items are provisional or excluded?
  • What maintenance access, pump backup and overflow arrangements are proposed?
  • What changes to the design or finished levels could increase the cost?

How to use the checklist with a builder

Bring the checklist to the first consultation and site review, along with your preferred rooms, driveway position, outdoor areas and any concerns about existing water. A site-aware discussion can identify whether the brief needs a survey, soil investigation, drainage review or specialist input before the design and estimate progress.

King Style Homes describes a process that moves from consultation and site review through concept and design, estimate and proposal, approvals, selections, construction updates and handover. For a Western or Northwest Sydney project, ask for drainage assumptions, responsibilities, inclusions and exclusions to be documented before the proposal is finalised.

Frequently asked questions

When should site drainage design begin?

It should begin during the site review and early design stages. Resolving levels and the likely discharge route before the layout is fixed can reduce the risk of redesign, unexpected retaining work or an unsuitable house position.

Do all residential sites need a stormwater tank or pump?

No single solution applies to every site. A tank or pump may be considered because of water-reuse objectives, site levels, local requirements or the available outlet, but the need and acceptable arrangement must be confirmed for the specific property.

Can a sloping block drain to the street?

Sometimes. It depends on the direction and amount of fall, the finished levels, the street infrastructure and the applicable approval requirements. If gravity discharge is not practical, an easement or pump-assisted arrangement may need to be investigated.

Who is responsible for preparing a detailed drainage plan?

Responsibility depends on the contract, project and approval pathway. Ask the builder who coordinates the work and which qualified designer or engineer prepares the technical documentation. Also confirm who submits it and responds to council or certifier comments.

Are drainage and service connections included in a builder’s square-metre rate?

Not necessarily. Drainage, earthworks, retaining and service connections are often separate site costs. Compare proposals by checking the inclusions, exclusions, allowances and assumptions rather than relying only on the advertised rate.

Conclusion: Resolve drainage before the design is locked

Good site drainage design starts with evidence about the block: accurate levels, catchments, soil, slope, services, easements, retaining requirements and existing water movement. From there, the team can test a practical discharge route, identify the documentation needed for the approval pathway and separate drainage costs from the house build rate.

Before approving a design or quote, ask for the drainage assumptions and responsibilities in writing. A consultation and site review with King Style Homes can help establish the brief and identify the drainage, approvals and construction questions that need to be resolved for your project.